RARECHEM AH CK 0157 - Names and Identifiers
RARECHEM AH CK 0157 - Physico-chemical Properties
Molecular Formula | C14H20O2
|
Molar Mass | 220.31 |
Density | 1.020±0.06 g/cm3(Predicted) |
Melting Point | 27 °C |
Boling Point | 150 °C |
Flash Point | 150-152°C/0.1mm |
Water Solubility | Insoluble in water. |
Vapor Presure | 3.98E-06mmHg at 25°C |
Appearance | Liquid |
BRN | 2050336 |
pKa | 4.78±0.10(Predicted) |
Storage Condition | 2-8°C |
Refractive Index | 1.5020 |
MDL | MFCD00037802 |
RARECHEM AH CK 0157 - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | R36/38 - Irritating to eyes and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
|
Hazard Note | Irritant |
RARECHEM AH CK 0157 - Introduction
8-phenylloctanoic acid is an organic compound with the chemical formula C14H18O2. The following is a description of the nature, use, formulation and safety information of 8-phenylloctanoic acid:
Nature:
-Appearance: 8-phenylloctanoic acid is a colorless to light yellow crystalline or crystalline powder.
-Solubility: It is easily soluble in non-polar solvents and almost insoluble in water.
-Melting point: The melting point is about 45-47°C.
-Flash Point: The flash point is about 172°C.
Use:
-8-phenylloctanoic acid can be used as a chemical intermediate and is widely used in the synthesis of organic compounds, dyes and pharmaceuticals.
-It can also be used for the preparation of surfactants, anti-mold agents and lubricants.
Method:
The preparation method of-8-phenylloctanoic acid is usually obtained by oxidizing N-octyl aldehyde. The reaction is generally carried out using an oxidizing agent such as hydrogen peroxide or potassium permanganate, and is carried out under alkaline conditions.
Safety Information:
-8-phenylloctanoic acid is generally considered to be relatively safe under normal conditions of use.
-Avoid contact with skin, eyes and mucous membranes during use. In case of accidental contact, rinse immediately with water and seek medical help.
-During operation, proper ventilation measures should be taken to avoid inhalation of dust or steam.
-Store properly and keep away from ignition.
Please note that this information is for reference only, and specific parameters and safety information should be determined according to the specific chemical source and application. When using and handling chemicals, make sure to follow appropriate safety procedures and operate in accordance with relevant regulations.
Last Update:2024-04-09 15:17:56